Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle. Interchangable Tool Rest The Spur Crown Center is

The Spur Crown Center is compatible with headstocks with 1MT spindles

It is mainly used for parting finished work from the waste

It converts 1-1/4" x 8TPI Female to 1" x 8TPI Male

The bowl rest is radiussed on the top and bottom edges for smooth movement of the chisels

Inside Grip Range:

Draw Bar Kit Steel Handwheel & Threaded Draw Bar with 3/8"x16TPI Thread Around 20"(50cm) Length for Woodturning Lathe Spindle. Interchangable Tool Rest The Spur Crown Center isSuitable for lathe spindle. Insertion tools with Morse cone Morse cone require pressure to prevent vibration. 3 8"x16TPI Thread for fitting morse cone, which has a suitable threaded support. With the help of the safety rod, the drill chuck or other tools on the spindle of the lathe can be prevented from loosening. The use of a drill feeder on the spindle of a lathe is ideal, for example when machining small workpieces, or when receiving polishing