180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 152.4 mm CLR) 200 "Bottle-Jack" The assembly interface consists of

The assembly interface consists of 3 primary functions

1" 4140 Shaft rides in 2 double-sealed ball bearings (no needle bearings or bushings

This die fits the Portabender Tube and Pipe Bender for bending 1" by 1" square tubing at a centerline radius of 3-1/2" with a maximum degree of bend of 90 degrees after springback

Outside Diameter of the Tubing (OD): 1" OD (25

Includes: 1-3/4" Dimple Dies | Requires 1-3/4" Pilot Hole

180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (28.0 mm OD, 152.4 mm CLR) 200 "Bottle-Jack" The assembly interface consists ofSpecs Outside Diameter of the Tubing (OD): 28. 0 mm Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 6" (152. 4 mm) Maximum Degree of Bend: 180, after springback Includes Steel Main Die Steel Backing Block with Anti Springback Tab Steel U Strap Resources Tube and Pipe Bending