V RETURN ALUMINIUM FASCIA BOARD (30mm Return, 45 Deg) - 3m Traditional Downpipe - 63mm Dia 5 deg angles and the

5 deg angles and the bottom bend of the swanneck can be site cut to achieve the desired projection from the gutter outlet to the wall face

If connecting directly to a 3-meter pipe length and not using an adjustable swanneck offsets

Marine grade aluminium Flush Joint downpipe (72x72mm  square) with an external architectural grade polyester powder coating

or on-site perforation

Designed for exposed rafter feet

V RETURN ALUMINIUM FASCIA BOARD (30mm Return, 45 Deg) - 3m Traditional Downpipe - 63mm Dia 5 deg angles and theAluminium sheet fascia board 3 metres in length. polyester powder coated with architectural grade exterior paint to decorative faces. Fix at max. 600mm centres with colour matched fixing screws Typically fixed to marine grade plywood backing boards 3mm expansion gap required at each joint Note: The panels include discreet holes used during the paint baking process for hanging. These holes are generally not visible after installation and may also be