3/8" Inset Double Demountable Hinge C10107 Alignment: The centerline of the

Alignment: The centerline of the hinge pins of both hinges (top and bottom hinge) after installation

The gap between the fence post and the gate should be between 2" and 2-3/4"

Flap opens 90 degrees flush with inside shelf

For upward opening cabinet doors

To release the touch latch

3/8" Inset Double Demountable Hinge C10107 Alignment: The centerline of theDouble demountable hinges mount with two inserts; one in a slot on the edge of the face frame and the other in a slot on the edge of the door. No screws are required. This hinge is made for 3 8" partial inset doors on a face frame cabinet. Partial inset doors have a cutout (rabbet) on the edge of the door. The cutout measures 3 8" in both directions. This hinge measures 2 1 4" tall and the joint length is 1 7 8".