Extra Heavy Duty Roller Bearing Weld-On Hinge C10064 The center-to-center screw-hole dimension for

The center-to-center screw-hole dimension for the hinge wing that mounts on the face frame is 2-1/8"

With "pintle style mounting" your gate can be installed so it can swing both ways (in and out) or it can be installed so that it opens only one way (either in or out)

which allows using this hinge along with architectural grade butt hinges

Good for use in tight spaces

inside and out

Extra Heavy Duty Roller Bearing Weld-On Hinge C10064 The center-to-center screw-hole dimension forThis extra heavy duty weld on hinge is designed to attach to a flat gate frame and a round or flat gate post. It has a heavy duty 5 16" thick yoke, a grade 8 hardened steel pivot bolt, and three sealed roller bearings. Leaves a 2 3 4" gap between the gate and frame. The yoke has an oval slot which allows you to adjust the gap between the gate frame and post by 1 2". Two hinges are required for most applications. Safe to powder coat with hinges