180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1" OD, 3-1/2" CLR) NPS 1-1/2 Outside Diameter of the Tubing

Outside Diameter of the Tubing (OD): 5/8" (15

13 cubic inches of oil/minute output at full pressure (vs

Steel Main Die

Creates 180-degree bends in less than 2 minutes (requires appropriate die)

6 cubic inches per minute oil output

180 Degree Square Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (1" OD, 3-1/2" CLR) NPS 1-1/2 Outside Diameter of the TubingSpecs Outside Diameter of the Tubing (OD): 1" (25. 4 mm) Minimum Wall Thickness (Mild Steel): 0. 065" (1. 7 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 125" (3. 2 mm) Centerline Radius: 3 1 2" (88. 9 mm) Maximum Degree of Bend: 180, after springback Includes Steel Main Die Steel Backing Block with Anti Springback Tab Steel U Strap Resources Tube and Pipe