Marvel - Falcon's Goggles (STL File) STL A few small details on

A few small details on this one so I'd recommend a 40 degree support angle to ensure that those come out nicely (mostly just the slots along the cheeks and jaw line)

The amount of support material required for this print is heavily dependent on the orientation in which you print it

The cuffs use magnets for the clasp and 1

Settings: I used a gyroid infill structure at 10% infill density and tree supports to get a strong print with a clean surface quality before sanding

though most parts don't even need any support aside from the name plate at the top

Marvel - Falcon's Goggles (STL File) STL A few small details on(STL FILES ARE FOR 3D PRINTING, NOT A PHYSICAL ITEM) Hey! Here's the STL File(s) for Falcon's goggles from the MCU. They print out in one piece and have plenty of surface area available for gluing lenses on. At some point I'll design some wings to go with these too. Settings: I used a gyroid infill structure at 5% infill density and tree supports to get a strong print with a clean surface quality before sanding. A lot of small details on these ones so