1-1/8" Crosby G-213 Round Pin Anchor Shackle, 9.5 ton capacity Size_1/4" add the one-leg back

add the one-leg back

Manufactured in the USA the Crosby SL-150M Slide-Loc lifting points are designed for quick attachment to engineered pick points on loads

The proper size rope is determined when the following criteria are met: The wire rope should pass through the 'Go' hole in the wedge

Built with all-steel construction and a long-lasting powder coat finish

delivering 1000 lb of lifting capacity with the ease of electric operation

1-1/8" Crosby G-213 Round Pin Anchor Shackle, 9.5 ton capacity Size_1/4" add the one-leg backForged, Quenched & Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot dip galvanized. Sizes 3 8 inch and below are mechanically galvanized. Fatigue rated to 20,000 cycles at 1 1 2 times the Working Load Limit. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the