Mintion - Beagle Camera Tripod Mount *STL File ONLY* This a 3D printed propane

This a 3D printed propane tank holder and mount made for the Bernzomatic 14

So it might not be black but it will all work the same

Use the grid to make or see if your design symmetric

This is a add-on for the Easy Saw that will allow you to clamp down on smaller pieces of metal

If you want to buy the Easy Saw Rotating Clamp that this adaptor goes to you can do so Here

Mintion - Beagle Camera Tripod Mount *STL File ONLY* This a 3D printed propaneThis is a 3D file that you can print on your 3D printer. This is designed to be printed with a 0. 4mm nozzle at 0. 2mm layer height. I used PLA but you should be able to use PLA+, ABS, PETG, ASA, Nylon or PC. Print Settings: Nozzle 0. 4mmLayer Height 0. 2mmShells 4Top Bottom Layers 4Infill 20%Supports NoneThe threads for this are printed but I suggest running a 1 4 20 screw throw the top and out the bottom side to make sure all the threads are cut