4-Prong Spring-Loaded Spur Drive Center 2MT with 1" Diameter for Woodlathe Woodturning Tools. 2.75" Series Chuck & Jaws No need for a drill

No need for a drill press

once one of the edges dulls just rotate the carbide inserts to a fresh

The amount of movement available offers a range of 40mm to 75mm internal and 52mm to 87mm external

Used to re-shape the bottoms of bowls that have already been turned

Easily open and close the three chuck jaws using the included chuck key

4-Prong Spring-Loaded Spur Drive Center 2MT with 1" Diameter for Woodlathe Woodturning Tools. 2.75" Series Chuck & Jaws No need for a drill4 prong drive center is the most common method of driving a workpiece between centers on the lathe. Sharp spurs give a strong bite into wood work piece. The 1" diameter of the center provides a strong grip so you can turn your piece without slipping. 1 4" spring loaded center pin retracts under pressure to prevent splitting. The Drive Center is compatible with headstocks with 2MT spindles. Spring loaded center point simplifies positioning of your