One Piece - Law's Kikoku (STL File) Physical Printing orientation should be such

Printing orientation should be such that the engravings should be facing straight up

The mask prints out fairly dense due to the surface geometry

Settings: I used a gyroid infill structure at 10% infill density and 3 walls/shells to get a strong print with a clean surface quality before sanding

with a very high internal density to give it the proper weight and feel

Settings: I used a gyroid infill structure at 5% infill density and tree supports to get a strong print with a clean surface quality before sanding

One Piece - Law's Kikoku (STL File) Physical Printing orientation should be suchSTL is a file format native to the stereolithography CAD software created by 3D Systems.